Does any one know how to hook up an after market amp to a 03 Tib. I usually can do it but can't seem to a way to run the power wire to the amp. Normally I would drill, but don't know where to begin. For the record, I have done it other cars, I just need some kind of diagram or reference point to start with. Thanks, any help would be appreciated.

Let me know if you find out the answer to your question . I am interested in doing the same on my 03 TIburon. The Infinity system is not all it was cracked up to be.

I found how to run the wires and such from newtiburon.com in the DIY section. it had pictures on what needed to removed and such

i ran my wires thru the wheel well i just removed the plastic foot pad and pushed it thru the wheel well removing the gaurd on the outside up to the battery took some work but looks clean.

the way i did it on my sonata was i ran it through the right side of the hood by the door. there should be some space by where the hood hinge cause my sonata is not the only car ive done that to. then theres usually a spot to run it throug and make it come in the door without pinching it. if you like i can take a pic on my sonata showing you where exactly its run.